News

Meet GETO at the 140th Canton Fair, Oct 23–27. See formwork, scaffolding, modular housing and solar storage solutions for global projects.

This article covers Ringlock scaffolding in three steps: understanding the components, choosing the right load series, and using a procurement checklist. It explains the roles of standards, ledgers, diagonal braces, jack bases, rosettes, wedge pins, and connection heads; compares the M48 series for lighter access work with the M60 series for heavy-duty support; and emphasizes that final load capacity must come from engineering design. It also provides an eight-point checklist covering steel grade, surface treatment, series selection, component completeness, dimensions, compliance documentation, customization, and after-sales support.

This guide explains how to choose a formwork system using five key criteria: structure, cycle time, reuse, finish, and total installed cost. It compares GETO's main systems, including aluminium formwork, steel-framed timber formwork, tunnel formwork, single-side wall frameworks, automatic hydraulic climbing formwork, Quick-Deck, and adjustable aluminium column formwork, highlighting their typical applications, cycle times, reuse potential, and finishing quality. The article also stresses evaluating total installed cost per real cycle rather than panel price alone, and offers a structure-first decision framework for matching systems to project types.

This article explains how balanced cantilever construction builds long-span bridge superstructures by casting segments symmetrically outward from piers, eliminating the need for ground-supported falsework over deep water, rivers, or steep valleys. It describes the diamond-shaped balanced cantilever carriage, its front and rear sliding seats, and how the outer, bottom, and inner molds move together to preserve dimensional accuracy and shorten cycle times. The article also highlights GETO's use of the method on the Batang Saribas Bridge, casting a 425-ton prestressed segmental box girder as the key Segment #1.

This guide explains the four key factors in selecting a PPVC/MIC mould: K/R/H series geometry, manual versus hydraulic automation, dimensional tolerance, and production capacity. It describes each series and its suitable module type, compares manual and hydraulic systems, emphasizes precision and batch consistency, and uses project examples such as Yishun North Gaia, One Bernam, and Piermont Grand EC to show how capacity planning works in practice.

This article explains how reusable formwork systems help contractors control construction costs by lowering labor requirements, accelerating construction cycles, improving productivity, reducing material waste, and enhancing concrete quality. It covers solutions including aluminium formwork, quick-deck systems, tunnel formwork, single-side wall framework, adjustable column formwork, and self-climbing platforms, and provides guidance on evaluating ROI and maximizing savings through early planning, proper training, and regular maintenance.

This guide explains what ringlock scaffolding is and how its rosette-and-wedge connection system works. It introduces the main components, including standards, ledgers, diagonal braces, rosettes, wedge pins, and jack bases, and highlights key advantages such as efficient hammer-based assembly, consistent modular connections, and high load capacity, with GETO's M60 single standard rated up to 19 tons under specified conditions. The article also covers common applications in bridges, tunnels, industrial facilities, buildings, and temporary structures, and compares ringlock scaffolding with traditional tube-and-coupler scaffolding.

This article explains how a one-stop construction and decoration materials supplier helps developers and contractors overcome the coordination, quality, and cost challenges of sourcing from multiple suppliers. It introduces GETO's integrated solutions, covering lighting, sanitary products, tiles, doors and windows, and cabinetry, and highlights the benefits of simplified project coordination, consistent quality management, and improved construction efficiency. The article also covers GETO's structural construction solutions, supporting a complete building process from construction to final finishing.

This article compares self-climbing protection screens and edge protection systems for high-rise construction, helping project teams evaluate safety coverage, efficiency, and suitability for different building types and construction conditions.